User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Rocker cover

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Engine Mechanical

Revision as of 02:00, 6 January 2008
Ddgonzal (Talk | contribs)

<- Previous diff
Current revision
ddgonzal (Talk | contribs)
(->Gasket)
Line 1: Line 1:
-The '''Rocker Cover''' or valve cover covers the top of the [[Cylinder head]] including the [[Rocker arms]] and valvesprings. The rocker cover is painted [[Colors|Datsun Blue]], which is a darker blue than the air cleaner.+The '''Rocker Cover''' covers the top of the [[Cylinder Head]] including the [[Rocker arms]] and valvesprings. The rocker cover is painted [[Colors|Datsun Blue]], which is a darker blue than the air cleaner. The rocker cover is also known as a valve cover or tappet cover.
-[http://wiki.datsun1200.com/index.php/Colors http://datsun1200.com/modules/myalbum/photos/thumbs/6547.jpg]+{{AlbumLinkH|Engine_color|6547|blue|height=300}}
-Also see: [[Oil cap]]+{{See|Oil cap}}<br>
 + 
 += Installation =
 +They are prone to leaking like most stamped steel covers. Biggest problem is over tightening. They should be finger tight and retightened at least every oil change.
 + 
 +* Hammer the flange flat before installing the gasket.
 +* Remove all traces of old gasket and sealer.
 +* Do not use sealer. Clean & flat will prevent leaks.
 + 
 +The black rubber gasket lasts forever. The cork gaskets tend to tear on removal of the cover.
 + 
 +Tighten all the valve cover screws finger tight. Then go around and re-tighten finger tight. After the engine warms up, finger tighten one last time. Instead of using a wrench which will overrtighten, use a Phillips screwdriver. Use thumb & finger to tighten; using the palm or fist to reef on the screwdriver will tighten too much and distort the metal flange.
 + 
 +{{search|Loctite+Threadlocker+Blue|Loctite Threadlocker Blue}} might help. I've never used it ... but the screws do get loose.
 + 
 += Identification =
 +[[B10]] (A10 engine): Black 'Datsun' label on top
 +<br>{{Album|19102}} {{AlbumH|27232|jpg|156}}
 + 
 +B110: Embossed 'Datsun', two threaded bosses for fuel rail, offset clip for throttle cable
 +<br>{{Photo|B110_rocker_1.jpg|Datsun%201200/wiki}} {{Photo|B110_rocker_2.jpg|Datsun%201200/wiki}} {{Photo|B110_rocker_3.jpg|Datsun%201200/wiki}}
 + 
 +B110 GX, center clip for throttle cable:
 +<br>{{Photo|rocker_center-1.jpg|Datsun%201200/wiki}} {{Photo|rocker_center-2.jpg|Datsun%201200/wiki}} {{Photo|rocker_center-3.jpg|Datsun%201200/wiki}}
 + 
 +B210
 +<br>{{Album|8355}}
 + 
 +B210 early 'Datsun' H5001: no threaded bosses, two clips for vacuum advance hose
 +<br>{{Album|25533}}
 + 
 + LATE B210
 + H7201 A14S.Van
 + H7800 A12S.Van
 + {{Album|26217}}
 + H8200 A12S.Sedan+Coupe
 + H8400 A14T
 + 
 +??? 'Datsun' - no bosses or clips
 +<br>{{Album|25532}} {{Photo|rocker_no_boss.jpg|Datsun%201200/wiki}}
 + 
 +H84 A14T Nissan right-angle vent
 +<br>{{Album|26386}}
 + 
 +Nissan 1
 +<br>{{Photo|nissan_cover.jpg|Datsun%201200/wiki}}
 + 
 +Nissan 2
 +<br>{{Photo|red_cover.jpg|Datsun%201200/wiki}}
 +<br>{{Photo|rcb1.jpg|Datsun%201200/wiki}} {{Photo|rcb2.jpg|Datsun%201200/wiki}} {{Photo|rcb3.jpg|Datsun%201200/wiki}} {{Photo|rcb4.jpg|Datsun%201200/wiki}}
 + 
 +[[B210]] A14: No threaded bosses on side (fuel rail does not bolt to rocker cover)
 + 
 +[[B310]]: Embossed 'Nissan'
 + 
 +13264-H7800 B120 7510-7907
 + 
 +13264-W8501 B120 7908-8910
 + 
 +13264-95W00 B120 8910-
 +<br>{{Album|1346}} {{Photo|13264-95W00a.jpg|Datsun%201200/wiki}} {{Photo|13264-95W00b.jpg|Datsun%201200/wiki}} {{Photo|13264-95W00c.jpg|Datsun%201200/wiki}}
 + 
 +Gold Top for A14E and A15E [[EGI]] engines - Factory EFI
 +<br>{{Album|23979}}
 + 
 +Nissan cover, front vent
 +<br>{{Photo|nissan_rocker-cover.jpg|Datsun%201200/wiki}}
 + 
 += EFI Cover =
 +Gold Top [[EGI]] fuel injection tappet cover
 + 
 + * rear vent (early A14E)
 + * front vent (late A14E + A15E)
 + 
 +=== EFI front vent ===
 +A15E/Late A14E cover with front vent 13264-H9201 7910-
 + 
 +Late A14 with front vent ([[B310]] round headlight models)
 +<br>{{Photo|Image032-11.jpg|Datsun%201200/wiki}} {{AlbumH|25773|jpg|300}} {{UploadPost|13822_5555d83295022.jpg|467924}} {{Album|25774}} {{Album|25775}}
 + 
 +{{Photo|vc1.jpg|Datsun%201200/wiki}} {{Photo|vc2.jpg|Datsun%201200/wiki}} {{Photo|vc3.jpg|Datsun%201200/wiki}}
 + 
 +=== EFI rear vent ===
 +Early A14E cover with rear vent 13264-H9200 -7909
 +{{See|Introduction_of_Datsun_Sunny_1400_GX-E#Blowby_Hose_ASSY}}
 + 
 +{{Album|22796}}
= GX Cover = = GX Cover =
-For the twin-carb [[1200GX Engine]]:+For the twin-carb [[1200GX Engine|1200GX Engine#Rocker Cover]]:
-[http://datsun1200.com/modules/myalbum/photo.php?lid=14415 http://datsun1200.com/modules/myalbum/photos/thumbs/14415.jpg] +[http://datsun1200.com/modules/myalbum/photo.php?lid=14415 http://datsun1200.com/uploads/thumbs/14415.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=19104 http://datsun1200.com/uploads/thumbs/19104.jpg]
* fuel-rail mounting brackets are in different place * fuel-rail mounting brackets are in different place
* choke cable bracket is in different place * choke cable bracket is in different place
-= Breather = += A12T Cover =
-[http://datsun1200.com/modules/myalbum/photo.php?lid=13527 http://datsun1200.com/modules/myalbum/photos/thumbs/13527.jpg] +B210 A12T twin carb
 +* Red paint (B210) instead of blue (B110)
 +* No rail brackets (B210)
-See: [[PCV|PCV System]]+[http://datsun1200.com/modules/myalbum/photo.php?lid=26096 http://datsun1200.com/uploads/thumbs/26096.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=26097 http://datsun1200.com/uploads/thumbs/26097.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=26098 http://datsun1200.com/uploads/thumbs/26098.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=26099 http://datsun1200.com/uploads/thumbs/26099.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=26100 http://datsun1200.com/uploads/thumbs/26100.jpg]
 + 
 += Breather =
 +{{Main|PCV}}
 + 
 +{{AlbumH!|13527|jpg|300}} {{Photo!|PCV_upper.jpg|sightings/forum}}
 + 
 += Gasket =
 +The same valve cover gasket (packing) fits all A10/A12/A13/A14/A15 engines. Nissan made several specification of material but the shape and dimensions are the same. The black rubber type is generally reusable, while the cork type often breaks.
 + 
 +{{Photo2|VS26049C.jpg}}
 + 
 + B110
 + 13270-18001 PACKING-ROCKER COVER - NLA
 + 
 + GASKET-ROCKER COVER
 + * 13270-18000/13270-18001 B10, B110, B120, B210 to '74-5
 + * 13270-H1000 B210 from '74-6, B310 all, B120 - 7803 &#12475;&#12531;&#12479;&#12463;&#12288;&#12471;&#12520;&#12454; {{search|%26%2312450%3B%26%2312452%3B%26%2312481%3B%26%2312461%3B%26%2312459%3B%26%2312452%3B|&#12450;&#12452;&#12481;&#12461;&#12459;&#12452;}}
 + * 13270-H1010 B310 [alternate supplier], B120 7804- &#12475;&#12531;&#12479;&#12463; &#12471;&#12520;&#12454; {{search|ishino+gasket+company|&#12452;&#12471;&#12494;&#12460;&#12473;&#12465;&#12484;&#12488;}}
 + 
 + AFTERMARKET
 + * BECK/ARNLEY Part # 0360669
 + * FEL-PRO Part # VS26049R (rubber type, black) [http://www.rockauto.com/catalog/x,carcode,1208483,parttype,10710 RockAuto.com $1]
 + * FEL-PRO Part # VS26049C (cork type)
 + * MAHLE VS30018 (cork-rubber mix)
 + * MCCORD VS138
 + * APEX AVC522
 + 
 +Cork - FelPro VS26049C
 +<br>{{Photo2|VS26049C-.jpg}}
 + 
 +Nissan Group gasket
 +<br>{{UploadPost|174_654f25a144e40.jpg|498029}}
= Customizing = = Customizing =
== Polishing == == Polishing ==
-[http://datsun1200.com/modules/myalbum/photo.php?lid=6687 http://datsun1200.com/modules/myalbum/photos/thumbs/6687.jpg]+{{Album|6687}}
== Chrome Plated == == Chrome Plated ==
-[http://datsun1200.com/modules/myalbum/photo.php?lid=1868 http://datsun1200.com/modules/myalbum/photos/thumbs/1868.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=3172 http://datsun1200.com/modules/myalbum/photos/thumbs/3172.jpg] +{{Album|1868}} {{Album|3172}}
== Painting == == Painting ==
-[http://datsun1200.com/modules/myalbum/photo.php?lid=881 http://datsun1200.com/modules/myalbum/photos/thumbs/881.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=1961 http://datsun1200.com/modules/myalbum/photos/thumbs/1961.jpg] +crinkle finish
-[http://datsun1200.com/modules/myalbum/photo.php?lid=2537 http://datsun1200.com/modules/myalbum/photos/thumbs/2537.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=3242 http://datsun1200.com/modules/myalbum/photos/thumbs/3242.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=3275 http://datsun1200.com/modules/myalbum/photos/thumbs/3275.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=13383 http://datsun1200.com/modules/myalbum/photos/thumbs/13383.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=5252 http://datsun1200.com/modules/myalbum/photos/thumbs/5252.jpg] +<br>{{UploadPost|2602_61a073ee1c7bc.jpg|496255}}
 + 
 +{{Album|1961}} {{Album|2537}} {{Album|3242}} {{Album|3275}}
 + 
 +Candy Apple green
 +<br>{{Album|13383}}
 + 
 +flat paint (non-shiny)
 +<br>{{Album|5252}}
 + 
 +Color matched
 +<br>{{Album|25953}} {{Album|881}}
 + 
 += Carbon Fiber =
 +== Autostyle ==
 +[http://model.auto-style.jp/sunnytruck/ZQR21H02182A01 http://auto-style.jp]
 +<br>{{Album|25621}}
 + 
 +Zero Queue Racing/09 Racing dry carbon cylinder head cover.
 + 
 + Dry carbon head cover for A-type engine
 + Blow-by mounting base is M14x1.5
 + Etc. your favorite Earl I can be installed
 + L-series oil cap for engine is available
 + Anyway light dry carbon steel
 + Autoclave molding
 + 
 +== CF Skin ==
 +Standard rocker cover with Carbon Fiber pattern applied (Water Transfer Printing).
 + 
 +hydroprint@xtra.co.nz or call Shane on 021689599
 + 
 +{{Album|25619}} {{Album|25620}}
= Alloy Covers = = Alloy Covers =
Aluminum light-alloy covers were never shipped on a Datsun 1200, but newer engine covers and aftermarket covers are available. Aluminum light-alloy covers were never shipped on a Datsun 1200, but newer engine covers and aftermarket covers are available.
-== Nissan Pulsar OEM cover==+{{Main|Alloy rocker cover}}
-[http://datsun1200.com/modules/myalbum/photo.php?lid=13363 http://datsun1200.com/modules/myalbum/photos/thumbs/13363.jpg] + 
 +{{ThumbH!|25988}} {{ThumbH!|12516}} {{ThumbH!|25983}} {{ThumbH!|10030}}
 + 
 += Part Numbers =
 +{{See|Oil cap}}
-== Armbrust ==+{{See|#Gasket}}
-Nippon Armbrust+
-[http://datsun1200.com/modules/myalbum/photo.php?lid=4105 http://datsun1200.com/modules/myalbum/photos/thumbs/4105.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=12516 http://datsun1200.com/modules/myalbum/photos/thumbs/12516.jpg] [http://www.datsuncherry.ch http://ddgonzal.members.winisp.net/getThumb.aspx?width=140&uri=http://www.datsuncherry.ch/images/aluvent3.JPG]+ B110
 + 13264-H1000 ASSY-COVER VALVE ROCKER - NLA
 + 13264-H7000 ASSY-COVER,VALVE ROCKER 0772- NLA
 + 08915-13610 WASHER-LOCK FIXING ROCKER COVER 6 $1.06
 + 08360-61612 SCREW-MACHINE FIXING ROCKER COVER 6 > 08310-61612 $0.65
-== Tomei ==+ A-series COVER ASS'Y-valve rocker
-[http://datsun1200.com/modules/myalbum/photo.php?lid=4742 http://datsun1200.com/modules/myalbum/photos/thumbs/4742.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=7533 http://datsun1200.com/modules/myalbum/photos/thumbs/7533.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=8747 http://datsun1200.com/modules/myalbum/photos/thumbs/8747.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=9873 http://datsun1200.com/modules/myalbum/photos/thumbs/9873.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=12481 http://datsun1200.com/modules/myalbum/photos/thumbs/12481.jpg] + * 13264-18001 B10
 + * 13264-18002 B10 from engine A10-173620
 + * 13264-18003 B10
 + * 13264-H0100 B10
 + * 13264-H1000 'Datsun' B110 exc. GX
 + * 13264-H2300 B110 GX
 + * 13264-H7800 'Datsun' B120 7510-7907
 + * 13264-W8501 'Nissan' B120 7908-8910
 + * 13264-95W00 'Nissan' B120 8910-
 + * 13264-H5001 'Datsun' B210 A12S
 + * 13264-H5702 B210 A12T
 + * 13264-H7200 B210 A14S Van
 + * 13264-H7800 B210 Van
 + * 13264-H8200 B210 A12S Sedan, Coupe
 + * 13264-H8400 B210 A14T
 + * 13264-H7800 B310 Van to 7909
 + * 13264-W8501 B310 Van from 7910
 + * 13264-H8500 B310 A12S, A14S Sedan, Coupe
 + * 13264-H9200 B310 A14E to 7909
 + * 13264-H9201 B310 A14E 7910-8010, A15E 8011-
 + * 13264-G3400 B310 A13S, A15S 8011-
-== Morris Minor World ==+ B10 Japan 1966-1970
-[http://datsun1200.com/modules/myalbum/photo.php?lid=10923 http://datsun1200.com/modules/myalbum/photos/thumbs/10923.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=6307 http://ddgonzal.members.winisp.net/drawThumb3.aspx?width=140&uri=datsun1200.com/modules/myalbum/photos/thumbs/6307.jpe.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=6308 http://ddgonzal.members.winisp.net/drawThumb3.aspx?width=140&uri=datsun1200.com/modules/myalbum/photos/thumbs/6308.jpe.jpg]+ ASS'Y-COVER-valve rocker
 + 13264-18001 <> 13264-18002 [angle-vented cover?]
 + 13264-18002 from engine A10-173620
 + <>
 + 13264-18003 < 13264-H0100
 + 13264-H0100 [straight-up vented cover?]
 + 180 air cleaner v,s,k
 + 154 air cleaner truck
 + 180 hose to rocker cover ? how can this connect to two different-shaped vents
 + BLOCK 18000, 18001, 257 Coupe
-== Others ==+A10 engine
-[http://datsun1200.com/modules/myalbum/photo.php?lid=931 http://datsun1200.com/modules/myalbum/photos/thumbs/931.png] [http://datsun1200.com/modules/myalbum/photo.php?lid=4761 http://datsun1200.com/modules/myalbum/photos/thumbs/4761.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=4762 http://datsun1200.com/modules/myalbum/photos/thumbs/4762.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=7819 http://datsun1200.com/modules/myalbum/photos/thumbs/7819.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=10030 http://datsun1200.com/modules/myalbum/photos/thumbs/10030.jpg] +<br>{{Album|17129}} {{Album|19102}}
 + B210 JAPAN 1976-1977
 + COVER ASSY-VALVE ROCKER
 + 13264-H7201 A14S except V
 + 13264-H7800 V
 + 13264-H8200 A12S.S,K
 + 13264-H8400 A14T
-[http://datsun1200.com/modules/myalbum/photo.php?lid=6286 http://ddgonzal.members.winisp.net/drawThumb3.aspx?width=140&uri=datsun1200.com/modules/myalbum/photos/thumbs/6286.jpe.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=6287 http://ddgonzal.members.winisp.net/drawThumb3.aspx?width=140&uri=datsun1200.com/modules/myalbum/photos/thumbs/6287.jpe.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=6323 http://ddgonzal.members.winisp.net/drawThumb3.aspx?width=140&uri=datsun1200.com/modules/myalbum/photos/thumbs/6323.jpe.jpg] + B310 USA
 + 13264-H7201 B310 A12A USA -0780
 + 13264-H9500 B310 A12A USA 0880-
 + 13264-H7201 A14 FED (KFU), A14 CAN
 + 13264-H7260 A14,A15 FED (EXC KFU) A14,A15 CAL
 + 13264-H9500 A14,A15 USA 0880- 13264-H7260
 + &#12525;&#12483;&#12459;&#12540; &#12459;&#12496;&#12540; &#12479;&#12506;&#12483;&#12488; &#12459;&#12496;&#12540; &#12504;&#12483;&#12489; &#12459;&#12496;&#12540;
-[[Category:Engine Mechanical]]+[[Category:Engine Mechanical]]{{End}}

Current revision

The Rocker Cover covers the top of the Cylinder Head including the Rocker arms and valvesprings. The rocker cover is painted Datsun Blue, which is a darker blue than the air cleaner. The rocker cover is also known as a valve cover or tappet cover.

6547.jpgblue

See also: Oil cap

Contents

Installation

They are prone to leaking like most stamped steel covers. Biggest problem is over tightening. They should be finger tight and retightened at least every oil change.

  • Hammer the flange flat before installing the gasket.
  • Remove all traces of old gasket and sealer.
  • Do not use sealer. Clean & flat will prevent leaks.

The black rubber gasket lasts forever. The cork gaskets tend to tear on removal of the cover.

Tighten all the valve cover screws finger tight. Then go around and re-tighten finger tight. After the engine warms up, finger tighten one last time. Instead of using a wrench which will overrtighten, use a Phillips screwdriver. Use thumb & finger to tighten; using the palm or fist to reef on the screwdriver will tighten too much and distort the metal flange.

Loctite Threadlocker Blue might help. I've never used it ... but the screws do get loose.

Identification

B10 (A10 engine): Black 'Datsun' label on top
19102.jpgAlbum 19102 27232.jpgAlbum 27232

B110: Embossed 'Datsun', two threaded bosses for fuel rail, offset clip for throttle cable
B110_rocker_1.jpg B110_rocker_2.jpg B110_rocker_3.jpg

B110 GX, center clip for throttle cable:
rocker_center-1.jpg rocker_center-2.jpg rocker_center-3.jpg

B210
8355.jpgAlbum 8355

B210 early 'Datsun' H5001: no threaded bosses, two clips for vacuum advance hose
25533.jpgAlbum 25533

LATE B210
H7201 A14S.Van
H7800 A12S.Van
26217.jpgAlbum 26217
H8200 A12S.Sedan+Coupe
H8400 A14T

??? 'Datsun' - no bosses or clips
25532.jpgAlbum 25532 rocker_no_boss.jpg

H84 A14T Nissan right-angle vent
26386.jpgAlbum 26386

Nissan 1
nissan_cover.jpg

Nissan 2
red_cover.jpg
rcb1.jpg rcb2.jpg rcb3.jpg rcb4.jpg

B210 A14: No threaded bosses on side (fuel rail does not bolt to rocker cover)

B310: Embossed 'Nissan'

13264-H7800 B120 7510-7907

13264-W8501 B120 7908-8910

13264-95W00 B120 8910-
1346.jpgAlbum 1346 13264-95W00a.jpg 13264-95W00b.jpg 13264-95W00c.jpg

Gold Top for A14E and A15E EGI engines - Factory EFI
23979.jpgAlbum 23979

Nissan cover, front vent
nissan_rocker-cover.jpg

EFI Cover

Gold Top EGI fuel injection tappet cover

* rear vent (early A14E)
* front vent (late A14E + A15E)

EFI front vent

A15E/Late A14E cover with front vent 13264-H9201 7910-

Late A14 with front vent (B310 round headlight models)
Image032-11.jpg 25773.jpgAlbum 25773 13822_5555d83295022.jpgPost 467924 25774.jpgAlbum 25774 25775.jpgAlbum 25775

vc1.jpg vc2.jpg vc3.jpg

EFI rear vent

Early A14E cover with rear vent 13264-H9200 -7909

22796.jpgAlbum 22796

GX Cover

For the twin-carb 1200GX Engine#Rocker Cover:

14415.jpg 19104.jpg

  • fuel-rail mounting brackets are in different place
  • choke cable bracket is in different place

A12T Cover

B210 A12T twin carb

  • Red paint (B210) instead of blue (B110)
  • No rail brackets (B210)

26096.jpg 26097.jpg 26098.jpg 26099.jpg 26100.jpg

Breather

Main: PCV

13527.jpg PCV_upper.jpg

Gasket

The same valve cover gasket (packing) fits all A10/A12/A13/A14/A15 engines. Nissan made several specification of material but the shape and dimensions are the same. The black rubber type is generally reusable, while the cork type often breaks.

VS26049C.jpg

B110
13270-18001 PACKING-ROCKER COVER - NLA
GASKET-ROCKER COVER
* 13270-18000/13270-18001 B10, B110, B120, B210 to '74-5
* 13270-H1000 B210 from '74-6, B310 all, B120 - 7803 センタク シヨウ アイチキカイ
* 13270-H1010 B310 [alternate supplier], B120 7804- センタク シヨウ イシノガスケツト
AFTERMARKET
* BECK/ARNLEY Part # 0360669
* FEL-PRO Part # VS26049R (rubber type, black) RockAuto.com $1
* FEL-PRO Part # VS26049C (cork type)
* MAHLE VS30018 (cork-rubber mix)
* MCCORD VS138
* APEX AVC522

Cork - FelPro VS26049C
VS26049C-.jpg

Nissan Group gasket
174_654f25a144e40.jpgPost 498029

Customizing

Polishing

6687.jpgAlbum 6687

Chrome Plated

1868.jpgAlbum 1868 3172.jpgAlbum 3172

Painting

crinkle finish
2602_61a073ee1c7bc.jpgPost 496255

1961.jpgAlbum 1961 2537.jpgAlbum 2537 3242.jpgAlbum 3242 3275.jpgAlbum 3275

Candy Apple green
13383.jpgAlbum 13383

flat paint (non-shiny)
5252.jpgAlbum 5252

Color matched
25953.jpgAlbum 25953 881.jpgAlbum 881

Carbon Fiber

Autostyle

http://auto-style.jp
25621.jpgAlbum 25621

Zero Queue Racing/09 Racing dry carbon cylinder head cover.

Dry carbon head cover for A-type engine 
Blow-by mounting base is M14x1.5 
Etc. your favorite Earl I can be installed 
L-series oil cap for engine is available 
Anyway light dry carbon steel 
Autoclave molding 

CF Skin

Standard rocker cover with Carbon Fiber pattern applied (Water Transfer Printing).

hydroprint@xtra.co.nz or call Shane on 021689599

25619.jpgAlbum 25619 25620.jpgAlbum 25620

Alloy Covers

Aluminum light-alloy covers were never shipped on a Datsun 1200, but newer engine covers and aftermarket covers are available.

25988.jpg 12516.jpg 25983.jpg 10030.jpg

Part Numbers

See also: Oil cap
See also: #Gasket
B110
13264-H1000 ASSY-COVER VALVE ROCKER - NLA 
13264-H7000 ASSY-COVER,VALVE ROCKER 0772- NLA 
08915-13610 WASHER-LOCK FIXING ROCKER COVER 6 $1.06 
08360-61612 SCREW-MACHINE FIXING ROCKER COVER 6 > 08310-61612 $0.65
A-series COVER ASS'Y-valve rocker
* 13264-18001 B10
* 13264-18002 B10 from engine A10-173620
* 13264-18003 B10
* 13264-H0100 B10
* 13264-H1000 'Datsun' B110 exc. GX
* 13264-H2300 B110 GX
* 13264-H7800 'Datsun' B120 7510-7907
* 13264-W8501 'Nissan' B120 7908-8910
* 13264-95W00 'Nissan' B120 8910-
* 13264-H5001 'Datsun' B210 A12S
* 13264-H5702 B210 A12T
* 13264-H7200 B210 A14S Van
* 13264-H7800 B210 Van
* 13264-H8200 B210 A12S Sedan, Coupe
* 13264-H8400 B210 A14T
* 13264-H7800 B310 Van to 7909
* 13264-W8501 B310 Van from 7910
* 13264-H8500 B310 A12S, A14S Sedan, Coupe
* 13264-H9200 B310 A14E to 7909
* 13264-H9201 B310 A14E 7910-8010, A15E 8011-
* 13264-G3400 B310 A13S, A15S 8011-
B10 Japan 1966-1970
ASS'Y-COVER-valve rocker
13264-18001 <> 13264-18002          [angle-vented cover?]
13264-18002 from engine A10-173620
<>
13264-18003 < 13264-H0100
13264-H0100                         [straight-up vented cover?]
180 air cleaner v,s,k
154 air cleaner truck
180 hose to rocker cover ? how can this connect to two different-shaped vents
BLOCK 18000, 18001, 257 Coupe

A10 engine
17129.jpgAlbum 17129 19102.jpgAlbum 19102

B210 JAPAN 1976-1977
COVER ASSY-VALVE ROCKER
13264-H7201 A14S except V
13264-H7800 V
13264-H8200 A12S.S,K
13264-H8400 A14T
B310 USA
13264-H7201 B310 A12A USA -0780	
13264-H9500 B310 A12A USA 0880-
13264-H7201 A14 FED (KFU), A14 CAN 
13264-H7260 A14,A15 FED (EXC KFU) A14,A15 CAL 	  	
13264-H9500 A14,A15 USA 0880- 13264-H7260
ロッカー カバー タペット カバー ヘッド カバー 
¤