Revision as of 09:33, 7 January 2017 ddgonzal (Talk | contribs) (->Parts Needed) <- Previous diff |
Current revision ddgonzal (Talk | contribs) (->Evaporator) |
||
Line 1: | Line 1: | ||
- | Datsun 1200, unlike the Datsun 1000, was designed with air conditioning in mind. However, it was still a dealer-installed add-on option and so varied by country and region. In April 1978 it became a factory option for Japanese market [[B120|Sunny Truck]]. | + | Datsun 1200, unlike the Datsun 1000, was designed with air conditioning in mind. However, it was still a dealer-installed add-on option and so varied by country and region. In April 1978 it became a factory option for Japanese market [[B120|Sunny Truck]]. Also known as a '''cooler'''. |
{{Album!|15622}} | {{Album!|15622}} | ||
Line 23: | Line 23: | ||
{{Album|13934}} | {{Album|13934}} | ||
- | {{Album|9378}} | + | {{Album|9378}} {{Album|15371}} |
== Installation == | == Installation == | ||
Line 57: | Line 57: | ||
== Engine Brackets == | == Engine Brackets == | ||
- | Various types were used. Early A12 and late A12 brackets differ. | + | Various types of brackets were used over the years to fix the compressor to the engine. NOTE: early A12 and late A12 brackets differ. |
- | B110: All custom, various types | + | {{Main|Compressor brackets}} |
- | B120 1978-1979: Factory high-idler mount | + | |
- | B120 1980-: Factory low-idler pulley mount | + | |
- | A bracket can be fabricated of two 8mm strips of metal (going across) and two vertical strips to connect to the compressor. An idler pulley can be added from a Nissan or other vehicle. | + | You can: |
+ | * Fabricate your own brackets | ||
+ | * Buy used brackets from a B110/B210/B310 or Cherry/Pulsar | ||
+ | * Buy new | ||
- | V-belt: 810 or 814 mm | + | Compressor Types: YORK or axial |
- | <br>{{Album|20088}} {{Album|20089}} | + | <br>{{Album!|23103}} {{Album!|21821}} |
- | === Engine Brackets, Early === | + | == Evaporator == |
- | Compressor on early A12 (1970-1973). | + | RHD factory Nissan |
+ | <br>{{Album|15193}} | ||
- | Custom install on right-side, battery moved to trunk, compressor place just above oil pump. Mounted like an alternator with no idler pulley | + | Seen in USA |
- | <br>{{Photo2|CIMG2332_convert_20090616103747.jpg}} | + | <br>{{Album|15372}} |
- | {{Photo!|acb.jpg|wiki}} | + | LHD kit by Vintage Air 672001-VHY [http://summitracing.com/parts/vta-672001vhy/overview/ $309] at Summit |
+ | <br>{{Photo2|vta-672001vhy_sn_xl.jpg}} | ||
- | This in an Australia 1200. It uses a humongous bracket to space the compressor out past the low-mounted alternator. | + | Australia aftermarket |
- | <br>{{Album|9377}} {{Album|9378}} | + | <br>{{Album|5060}} |
- | Here is a USA 1200 with a slightly different setup: | + | PB110 with triple-vent unit (knobs below vents) |
- | <br>{{Album|2185}} | + | <br>{{UploadPost|174_65ad9242af80f.jpg|498203}} |
- | === Late Engine === | + | = Electric Compressor = |
- | For late model A12 (1974-up). | + | New compressors are available driven by built-in electric motor rather than the vehicle engine belts. All you need is a high output alternator to power it, no need to track down engine mounting brackets and pulleys from ripoff merchants only to find you have the wrong components. The new unit is more efficient than the clapped out old 50 year old units. You also have the option to mount the unit in a remote location to keep a clean engine bay. |
- | Low-mount Pulley (1979-up) for radial type compressor | + | 12V electric compressors are available from heavy-class trucks, and could be used — however these can be $10,000 new. Classic car customizers like Sierra have units for $2500. The higher capacity units (10,000 BTU) are recommended (1972 systems for the 1200 were 12,000 BTUs). This strong a compressor can draw 60-80 amps, necessitating fitting a 120A alternator. Possibly an inexpensive used {{search|GM+120A+alternator|GM 120A alternator}} could be adapted. So you would be trading a belt-driven compressor for a larger belt-driven alternator. But there are still advantages, including the ability to turn off the Aircon when ultimate performance is called for, and easier engine repairs. Plus the new compressors are variable-speed for improved efficiency and actually take less power to drive than the old belt-driven models. |
- | <br>{{Album|20081}} {{Album|26588}} {{Album|21783}} {{Album|20079}} {{Photo!|cb0.png|wiki}} {{Photo2|cb1.jpg}} {{Photo2|cb2.jpg}} {{Photo2|cb3.jpg}} | + | |
- | Unknown bracket | + | A good used electric AC compressor from a 2012-2018 Ford Focus Hybrid (compressor YCC348) or any 2005-up Prius or Lexus hybrid vehicle might be inexpensive from the wreckers, or new as cheap as $450. Units range in price between around $1000-2500AUD. However, these run on high-voltage AC power. The compressors may include the DC-to-AC inverter, but where would you get the 180 to 300 volts to power it? |
- | <br>{{Album|18710}} | + | |
- | + | ||
- | New Compressor-type | + | |
- | <br>{{Album|21821}} {{Album|23102}} | + | |
- | + | ||
- | Old compressor type (York-type) | + | |
- | <br>{{Album|21822}} {{Album|23103}} | + | |
- | + | ||
- | Custom bracket for modern short compressor, made out of 6mm stock | + | |
- | <br>{{Photo2|20120628221909a02.jpg}} {{Photo2|20120701101711062.jpg}} | + | |
- | + | ||
- | Early B210 Japan | + | |
- | <br>{{Album|25501}} | + | |
- | + | ||
- | Low-mount B310 (H86, 1981-1982) | + | |
- | <br>{{UploadPost|174_5806b82922ab6.jpg|481951}} {{UploadPost|17554_5806e018e2f44.jpg|481953}} | + | |
- | + | ||
- | '5 SPEED DATSUN 120YCCC' | + | |
- | <br>{{UploadPost|17554_5806e01fac29e.jpg|481953}} | + | |
- | + | ||
- | C120 [[Vanette]] A15 | + | |
- | <br>{{Photo!|C120_A15_ac1.jpg}} {{Photo!|C120_A15_ac2.jpg}} | + | |
- | + | ||
- | === Part Numbers === | + | |
- | JDM B120 | + | |
- | FOR YORK-TYPE COMPRESSOR (1978) | + | |
- | * 11910-G1661 BRACKET A | + | |
- | * 11911-G1661 BRACKET B | + | |
- | * 11925-A0100 IDLER PULLEY | + | |
- | * 11933-A0100 ADJUSTER NUT | + | |
- | * 11917-M0100 ADJUSTER BOLT | + | |
- | + | ||
- | JDM B120 | + | |
- | FOR RADIAL COMPRESSOR (1979-_) | + | |
- | * 11910-95W00 BRACKET | + | |
- | * 11925-G1615 IDLER PULLEY | + | |
- | + | ||
- | USA B310 | + | |
- | 11910-H9100 BRACKET-COMPRESSOR -0678 | + | |
- | 11910-H9101 BRACKET-COMPRESSOR 0778- | + | |
- | 11910-H9900 BRACKET-COMPRESSOR 0879- | + | |
- | + | ||
- | JDM B310 | + | |
- | 11910-H7401 -8010 BRACKET-COMPRESSOR | + | |
- | 11910-H8661 8011- BRACKET-COMPRESSOR | + | |
- | 11925-H8900 IDLER PULLEY | + | |
- | + | ||
- | JDM A10 A14 | + | |
- | 11910-H7401 BRACKET-COMPRESSOR -8003 | + | |
- | 11910-G2500 BRACKET-COMPRESSOR 8004- | + | |
- | 11925-H8900 IDLER PULLEY 7804- | + | |
- | 11925-M3001 IDLER PULLEY -7803 | + | |
- | 11925-W0400 IDLER PULLEY 7906- A14,Z16/Z18 | + | |
- | 11926-W0400 BRACKET-IDLER PULLEY 7906- | + | |
- | + | ||
- | JDM C120 | + | |
- | 11910-G2500 BRACKET-COMPRESSOR 8106-8210 | + | |
- | 11910-G3400 BRACKET-COMPRESSOR A 8210- | + | |
- | 11911-G3400 BRACKET-COMPRESSOR B 8210- | + | |
- | 11910-G3401 BRACKET-COMPRESSOR 8407- | + | |
- | 11925-H8900 IDLER PULLEY | + | |
- | + | ||
- | JDM C22 - high-mount pulley bracket | + | |
- | 11910-G5100 BRACKET-COMPRESSOR | + | |
- | 11910-G5110 BRACKET-COMPRESSOR | + | |
- | 11925-H8900 IDLER PULLEY | + | |
- | + | ||
- | == Evaporator == | + | |
- | RHD factory Nissan | + | |
- | <br>{{Album|15193}} | + | |
- | + | ||
- | LHD kit by Vintage Air 672001-VHY [http://summitracing.com/parts/vta-672001vhy/overview/ $309] at Summit | + | |
- | <br>{{Photo2|vta-672001vhy_sn_xl.jpg}} | + | |
= Left-hand Drive = | = Left-hand Drive = | ||
Line 171: | Line 100: | ||
== USA == | == USA == | ||
+ | {{Album|28781}} | ||
+ | <br> INSTALLATION OF 1971 AIR CONDITION KIT IN 1972 VEHICLES | ||
+ | <br>{{TSB|TS72-05|January 11, 1972||General Information|All}} | ||
+ | |||
+ | Frigiking Air Conditioning units are redesigned anually for each model Datsun vehicle Never attempt to install a 1971 model air conditioning unit on a 1972 model vehicle, nor a unit designed for one model vehicle on a different model vehicle The units are not interchangable, either from year to year or from model to model | ||
+ | |||
1972 Brochure | 1972 Brochure | ||
<br>{{Album|24798}} {{Album|24799}} {{Album|24800}} | <br>{{Album|24798}} {{Album|24799}} {{Album|24800}} | ||
Line 227: | Line 162: | ||
== USA Type 2 == | == USA Type 2 == | ||
- | {{Photo2|10-30-2005102833AM.jpg}} | + | {{Album|7450|was=Photo2/10-30-2005102833AM.jpg}} |
== USA Type Frigette == | == USA Type Frigette == | ||
Line 242: | Line 177: | ||
* 21060-A4605, 21060-N0100 FAN-COOLING D=330 FOR TROPICAL USA | * 21060-A4605, 21060-N0100 FAN-COOLING D=330 FOR TROPICAL USA | ||
330 mm diameter | 330 mm diameter | ||
+ | |||
+ | = NISSAN GENUINE PARTS = | ||
+ | Sloop sailboat, Scuba diver & Yellow B110, dash-type air conditioner | ||
+ | <br>{{AlbumH|28904}} {{AlbumH|28905}} {{AlbumH|28906}} | ||
+ | <br>{{translate|oh! cool | ||
+ | <br>日産純正 | ||
+ | <br>カークーラー | ||
+ | <br>|oh! cool | ||
+ | <br>NISSAN GENUINE PARTS | ||
+ | <br>Car Cooler}} | ||
= Sunny Truck Kit = | = Sunny Truck Kit = | ||
- | Starting 1978 April a factory cooler kit was offered with upright compressor and standard interior unit. It is a very nicely designed unit, however the interior cooler protrudes into the passenger legroom and precludes using a package tray. | + | Starting 1978 April a factory cooler kit was offered with upright compressor and standard interior unit. It is a very nicely designed unit, however the interior cooler protrudes into the passenger legroom and precludes using a package tray. Would you rather have aircon or a [[Package Tray]]? |
- | From October 1979 a uniform kit was offered with DKKC radial-type compressor. | + | In August 1979 this kit was updates with a different compressor and low-mount idler. |
+ | {{Main|1979 aircon}} | ||
{{Album|20078}} | {{Album|20078}} | ||
Line 252: | Line 198: | ||
{{Album|20087}} | {{Album|20087}} | ||
- | |||
- | You need all these parts: | ||
- | * Ass'y indoor "cooler unit" (with integrated air volume switch, evaporator, and blower fan) | ||
- | *: {{Thumb|15193}} {{Thumb|4163}} | ||
- | * air conditioner compressor | ||
- | *: {{Thumb|20084}} {{Thumb|20085}} | ||
- | * V-belt: 814 mm | ||
- | *: {{Thumb|20089}} | ||
- | * compressor bracket | ||
- | *: {{Thumb|20079}} | ||
- | * crank pulley (double V-belt version) | ||
- | *: {{Thumb|20080}} | ||
- | * Twin Condensors (before radiator, radiator horizontal) | ||
- | *: One has an electric fan | ||
- | ** Pipe connecting twin condensors | ||
- | |||
- | * High-pressure flexible pipe (from compressor to condensor) | ||
- | * Low-pressure hose (from evaporator to compressor) | ||
- | * Tube-Liquid Tank to Evaporator | ||
- | |||
- | * Liquid Tank | ||
- | ** Bracket to mount Tank on core support | ||
- | |||
- | * Receiver tank (Liquid tank) | ||
- | * Relay (for compressor) | ||
- | * Wiring harness | ||
- | * Capacitor for electric fan | ||
- | |||
- | Vents may be opened or closed: | ||
- | <br>{{Album|20082}} | ||
- | |||
- | Twin Condensors and Liquid Tank with connecting pipes. | ||
- | <br>{{Album|20086}} | ||
- | |||
- | Condensor-to-Liquid Tank hose is routed along the top of core support. | ||
- | <br>{{Album|15192}} | ||
- | |||
- | Compressor is mounted low on left side of engine. | ||
- | <br>{{Album|15194}} | ||
- | |||
- | Cooler Unit lines: Evaporator Inlet & Outlet and drain hose | ||
- | <br>{{Album|20083}} | ||
- | |||
- | {{Photo|aircon-1.jpg|Datsun%201200/Parts}} {{Photo|aircon-2.jpg|Datsun%201200/Parts}} {{Photo|aircon-3.jpg|Datsun%201200/Parts}} {{Photo|aircon-4.jpg|Datsun%201200/Parts}} {{Photo|aircon-5.jpg|Datsun%201200/Parts}} {{Photo|aircon-6.jpg|Datsun%201200/Parts}} {{Photo|aircon-7.jpg|Datsun%201200/Parts}} | ||
= Retail Kit = | = Retail Kit = |
Current revision
Datsun 1200, unlike the Datsun 1000, was designed with air conditioning in mind. However, it was still a dealer-installed add-on option and so varied by country and region. In April 1978 it became a factory option for Japanese market Sunny Truck. Also known as a cooler.
Contents |
Parts Needed
Buy Universal Air Conditioning kits - $500 on eBay. $1300 from Summit. Contain compressor and everything needed except engine mounting brackets and V-belt.
- Pump (Compressor) & mounting bracket
- Double crankshaft pulley & V-belt
- Condensor (radiator-like unit)
- Filter dryer/receiver
- Evaporator (under-dash unit)
- Hoses
- Wiring
double-belt Crankshaft Pulley
Since B110 A/C is fairly rare, you can source most of the parts from a B210 or B310. Only the interior vent setup is needed specific to the 1200.
Installation
- Install all the parts, except leave the dryer/receiver plug and unplumbed
- Drive to the aircon service shop
- They will evacuate the system (vacuum pump), charge with R-134a and appropriate oil
Compressor
The compressor pump bolts to the engine and is driven by a v-belt. A double-groove Crankshaft Pulley is fitted.
- Early (to 1979): York-type compressor uses aluminum case. Commonly used from 1958-1980, they last a long time and are generally interchangeable between different car makes. When replacing, unbolt your clutch unit and bolt it to the new compressor.
- Late (from 1980): Compact swash-type (radial) compressor
27630-G1660 COMPRESSOR-COOLER DKKC 27630-W7002 COMPRESSOR-COOLER DKKC [B421] * JDM Datsun B120 8110-8910 * JDM Datsun 720 L18 7909-8105 92610-G1900 COMPRESSOR-COOLER DKKC [B421] * B120 8910- 11910-G1661 BRACKET-COMPRESSOR 7804-7907 * 11911-G1661 BRACKET-COMPRESSOR [2nd piece] 11929-H1000 BELT-COMPRESSOR L-810 7804-7807 11910-G1615 BRACKET-COMPRESSOR 7908-8910 11910-95W00 BRACKET-COMPRESSOR 8910- 11929-G1615 BELT-COMPRESSOR L-814 7808- 11925-A0100 PULLEY ASSY-IDLER,COMPRESSOR 7804-7807 11925-G1615 PULLEY ASSY-IDLER,COMPRESSOR 7808- 11917-M0100 BOLT-ADJUST 7804-7907 * 11933-A0100 NUT 7804-7907
Engine Brackets
Various types of brackets were used over the years to fix the compressor to the engine. NOTE: early A12 and late A12 brackets differ.
You can:
- Fabricate your own brackets
- Buy used brackets from a B110/B210/B310 or Cherry/Pulsar
- Buy new
Compressor Types: YORK or axial
Evaporator
LHD kit by Vintage Air 672001-VHY $309 at Summit
PB110 with triple-vent unit (knobs below vents)
Electric Compressor
New compressors are available driven by built-in electric motor rather than the vehicle engine belts. All you need is a high output alternator to power it, no need to track down engine mounting brackets and pulleys from ripoff merchants only to find you have the wrong components. The new unit is more efficient than the clapped out old 50 year old units. You also have the option to mount the unit in a remote location to keep a clean engine bay.
12V electric compressors are available from heavy-class trucks, and could be used — however these can be $10,000 new. Classic car customizers like Sierra have units for $2500. The higher capacity units (10,000 BTU) are recommended (1972 systems for the 1200 were 12,000 BTUs). This strong a compressor can draw 60-80 amps, necessitating fitting a 120A alternator. Possibly an inexpensive used GM 120A alternatorᴳ could be adapted. So you would be trading a belt-driven compressor for a larger belt-driven alternator. But there are still advantages, including the ability to turn off the Aircon when ultimate performance is called for, and easier engine repairs. Plus the new compressors are variable-speed for improved efficiency and actually take less power to drive than the old belt-driven models.
A good used electric AC compressor from a 2012-2018 Ford Focus Hybrid (compressor YCC348) or any 2005-up Prius or Lexus hybrid vehicle might be inexpensive from the wreckers, or new as cheap as $450. Units range in price between around $1000-2500AUD. However, these run on high-voltage AC power. The compressors may include the DC-to-AC inverter, but where would you get the 180 to 300 volts to power it?
Left-hand Drive
Ecuador
Taiwan
USA
INSTALLATION OF 1971 AIR CONDITION KIT IN 1972 VEHICLES
Bulletin Number: TS72-05
Date: January 11, 1972
Classification Number:
Section: General Information
Models: All
Frigiking Air Conditioning units are redesigned anually for each model Datsun vehicle Never attempt to install a 1971 model air conditioning unit on a 1972 model vehicle, nor a unit designed for one model vehicle on a different model vehicle The units are not interchangable, either from year to year or from model to model
The air condition for Datsun cars is made by Frigiking. It's the only system approved by the Datsun factory.Except that the Factory used a different brand. Frigiking was only used in USA.
USA Type 1
Specifications
Frigiking dealer-installed package. Larger capacity than 240Z, but less than 510 or 521 pickup
PERFORMANCE Capacity: 12,500 BTU/hour Airflow: 180 CFM Evaporator Coil: 3/8 x .016 cu tubes, 4 rows staggered pattern, 12" x 5" x 2-1/2" fin series 120 flat aluminum Expansion Valve: 1-1/2 ton
ELECTRICAL Fan Switch: Reostat Thermostat: Ranco type A-30 Cold cut-out: 28°F ±2° Cold cut-in: 36°F ±2° Warm cut-out: 58°F ±4° Fan Motor: Double shaft, single speed, 4600 RPM @ 13.5 V 11.5 amps maximum current draw Clutch: Pitts 6" double groove 12V 4.0 amp Wiring: SAE specification J558a Overload Protection: Inline fuse 30 amps
COMPRESSOR: York 206 (6 cubic inches)
CONDENSOR: 3/8 x .016 cu. tube, 2 row inline pattern 13 x 12 x 1-1/2 fin seris 10 fins/inch
GENERAL KIT COMPONENTS: All meet SAE specifications
COMPRESSOR MOUNT KIT Brackets are 1/4" hot rolled steel, arc welded and painted Drive Pulley material: ASTMA-159, Class G3000, grey cast iron precision machined, balanced and painted Idler Pulley: Cast iron, fully machined with single-row sealed ball bearing Attaching Hardware: Grade 5, black, rust resistant Compressor Drive Belt: Standard automotive quality, 500 section
EVAPORATOR SECTION Material: High-strength injection-molded plastic case Knobs: injection-molded plastic
USA Type 2
USA Type Frigette
Frigette Brand. Aftermarket kits still sold at JC Whitney!
Optional Fan
Nissan option flex-fan (dealer item)
USA catalog * 21060-H1001 FAN-COOLING A12 (standard B110 fan) * 21060-A4605, 21060-N0100 FAN-COOLING D=330 FOR TROPICAL USA 330 mm diameter
NISSAN GENUINE PARTS
Sloop sailboat, Scuba diver & Yellow B110, dash-type air conditioner
oh! cool
日産純正
カークーラー
oh! cool
NISSAN GENUINE PARTS
Car Cooler
Sunny Truck Kit
Starting 1978 April a factory cooler kit was offered with upright compressor and standard interior unit. It is a very nicely designed unit, however the interior cooler protrudes into the passenger legroom and precludes using a package tray. Would you rather have aircon or a Package Tray?
In August 1979 this kit was updates with a different compressor and low-mount idler.
This kit is beautiful and easy to install. Unfortunately the interior cooler unit is bulky and protrudes farther into the passenger legroom than other types.
Retail Kit
Acqua Garage sells a R-134a kit, 2015 price was 300000 Yen (about $3000 USD).
- 1 hanging unit Unicla IMPERIAL III with 5/16 - 5/8 O-ring
- 2 AC compressor UP-90 = U02/A / A charging valves (no)
- 3 12 x 12 Condensor plust reducer joints
- 4 receivers & receiver BK
- 5 electric fan unicla 8 inch PUSH & banding
- 6 General purpose relay 2 pc
- 7 a. Special design compressor fixing bracket.
- 8 AC for stock taking crank pulley
- 9 cooling fan & spacers
- 10 hose
Unicla hanging unit 12V R134a right hand drive AG ALL-BLACK specifications (genuine Unicla, not a "Star Road" made in China knockoff)
O-rings made in Japan products composition 5/16-5/8 UNIF wiring fuse + universal mounting bracket included
AG special compressor UP 90 + U02 < gas valve protection > 12 V R134a O-rings
A/A clutch parts w/< front thickness and > pressure valve with 1/2 - 5/8 UNIF
comes with compressor fixing bracket for the A-series block
Condensor 12 inch×12 inch T22mm O-rings
Fitting F3/8-O5/16 reducer + F1/2-> O1/2 < reducer
Receiver-dryer and liquid tank < filter > PSW with O ring 5/16S-5/16S | bracket
Unicla electric pusher fan 8-inch | tie-locks
Relay
Crank pulley with extra groove for AC compressor drive belt
Hoses similar to this, made of varying quality components
OPTION 25000 Yen - 6-blade cooling fan
OPTION 58000 Yen - genuine brass radiator, fit original fan shroud (not included)
OPTION 13000 Yen - fan shroud
Front-distributor A12
Japan setup for front-distributor A12
1977
Non-factory Unicla 311609 from 1977 Sunny Truck H-B120
Unicla imperial-III under-dash unit
idler pulley
Unicla DA-299 compressor
Idle Speed Control
In 1989 they added the FICD (Fast Idle Control Device) to raise idle speed about 100 RPMs when the compressor runs.
Legroom
Since the cooler unit takes up some of the passenger legroom, what to do? One enterprising 1200 fan mounted the cooler unit in the dash:
Of course the downside is there is no glove box.