General specifications

Revision as of 23:27, 22 July 2016; view current revision
<-Older revision | Newer revision->

General specifications for Datsun 1200 are listed here.

For other parts and systems use the search box at end of this page (below).

Template:OwnersManual2

Overview

Measurements

• Wheelbase: 90.6 inch (2,300 mm) ALL, including truck
• Overall length: 150.8 inch (3,830 mm) Sedan & Coupe
• Overall width:
• Overall height:
• Track, front:
• Track, rear:
• Turning radius:
• Ground clearance: 6.7 inch (170 mm) Sedan & Coupe

For more details, see: Measurements

Components

• Engine:
• Clutch:
• Transmission, manual:
• Transmission, automatic:
• Rear Axle:
• Suspension:
• Brakes:
• Steering Gearbox: Recirculating ball type
• Wheel and Tire: 6.00-12-4PR, 4J Rim

Capacities

• Fuel tank:
• Cooling System:
• Oil pan:
• Oil filter:
• Transmission case, manual:
• Transmission case, automatic:
• Differential case:
• Engine number:
• Chassis Identification number:

Engine Specifications

• Displacment:
• Bore & Stroke:
• Compression Ratio
  • 9.0:1 Japan, Australia
  • 9.0:1: 1971 Export
  • 10.0:1 A12GX Hi-gas
  • 9.5:1 ??? A12GX Lo-gas
  • 8.5:1: 1972 Export (e.g. North America)
  • 8.5:1: 1973 North America
    • Source: Service Bulletin 1974 Introduction of New Datsun B210 Series
• Spark plugs firing order: 1-3-4-2 (same as most four-cylinder engines)
• Dwell angle at idle:
• Ignition Timing:
• Idling speed:
• Spark plug gap:
• Distributor point gap:
• Valve Clearance (hot):
• Belt tension: