User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

RTV

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Categories: Engine Mechanical | Service Equipment

Revision as of 05:39, 30 July 2016
ddgonzal (Talk | contribs)

<- Previous diff
Revision as of 06:36, 10 July 2018
ddgonzal (Talk | contribs)
(->Usage)
Next diff ->
Line 32: Line 32:
4. bolt it on -- not too tight 4. bolt it on -- not too tight
-RTV gasket should have very little squeeze out. You don't want that stuff inside the engine, but only on the sealing surfaces.+RTV gasket should have very little squeeze out. You don't want that stuff inside the engine, but only on the sealing surfaces. Excess amounts will squeeze out, and may clog oil or water passages.
Get the gaskets surfaces clean and flat Get the gaskets surfaces clean and flat
<br>{{Album|23595}} <br>{{Album|23595}}
-{{Album|23596}}+Use thin bead of RTV
 +<br.{{Album|23596}}
-{{Album|23597}}+After mating of the parts, only a minimal amount of RTV will bulge out
 +<br>{{Album|23597}}
[[Category:Engine Mechanical]] [[Category:Engine Mechanical]]
-[[Category:Service Equipment]]+[[Category:Service Equipment]]{{End}

Revision as of 06:36, 10 July 2018

For many parts you don't need a gasket, you can use just RTV for a leak-proof seal. But RTV is over easy to misuse, so follow the directions to the letter. Engine failure has resulted from improper RTV application.

Overview

Instead of a gasket, use RTV silicone sealer "gasket maker". Just be careful not to use too much and to follow the directions (e.g. let it partially set up before assembly)

CAUTION: Do not use on the oil pump

Nissan uses RTV, for example on KA oil pans. RTV works good if you are careful and use it thinly and evenly. But it is very easy to make a mess with it.

Do not use a gasket AND RTV.

Permatex have "Gear Oil RTV Sealant" Quote:
Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing.

They also have Ultra Black RTV Silicone which is designed for "differential covers".

Oxygen Sensor Safe RTV

Usage

Follow the directions to the letter on the package.

1. Remove all trace of prior gasket
2. Apply a thin but consistent amount of RTV
3. Let "set" to tack before mating the parts
4. bolt it on -- not too tight

RTV gasket should have very little squeeze out. You don't want that stuff inside the engine, but only on the sealing surfaces. Excess amounts will squeeze out, and may clog oil or water passages.

Get the gaskets surfaces clean and flat
23595.jpgAlbum 23595

Use thin bead of RTV <br.23596.jpgAlbum 23596

After mating of the parts, only a minimal amount of RTV will bulge out
23597.jpgAlbum 23597{{End}